Stratos Micra 25: The Ultimate Guide to Downloading and Installing Its Software
40 12.1 Fault display The fault display shows the following information: On-Line Function On-Line Function Faulty Network Functions Faulty Network Functions (A/B) Faulty Network Functions (2A/2B) Current date and time Faulty Functions Faulty Functions (R) Faulty Functions Faulty Functions (S) Faulty Functions, or Loop, Faulty Functions Faulty Functions, or Loop, Unit Faulty Functions Faulty Functions, or Loop, Detectors Faulty Functions, or Loop, Reset Code Page 40 stratos micra 25 software download 42 13.1 Fault monitoring The remote control software enables the system administrator to monitor the detectors remotely. This function can be selected by selecting the relevant menu option. A good time to run this function is as a part of planned maintenance. The system administrator can do this by selecting the Fault display section and all the fault displays will be displayed (see figure 32). This menu option can be selected from the remote control software menu or from the menu on the control panel. If the remote software is not loaded then the Menu option will open to the Right page 42 stratos micra 25 software download 43 14.1 Fault investigation A full fault investigation is available if the first faulting detector is located on the same connector as the detector monitoring the fault, but not the Command Module or the network controllers. This may be useful if, for example, the monitor indicator is showing an out-of-range fault which you are unable to resolve. To start a fault investigation, select the Fault investigation section of the menu options of the remote software. The system administrator may then highlight the fault and press the Fault investigation button. The system administrator may then view the exact fault and the fault investigation may be completed or continue if further attempts are required to isolate the fault. In the A line example, the fault indicator (red if device is faulty, green if OK) is flashing. If the problem is in the monitoring unit, then the monitor indicator is also flashing. If the problem is on the router, then the router check (green check mark) is flashing. If the monitor or router is OK, the indicator will show an OK symbol. Page 43 stratos micra 25 software download 44 15.1 Logging The remote control software has a logging function that enables the system administrator to check the detector system messages. The logging function can be selected by selecting the relevant menu option. A good time to run this function is as a part of planned maintenance. The system administrator can do this by selecting the Logging section and all the logging results will be displayed (see figure 33). This menu option can be selected from the remote control software menu or from the menu on the control panel. If the remote software is not loaded then the Menu option will open to the Right page 44 stratos micra 25 software download 45 16.
stratos micra 25 software download